LG LT1000P Water Filter: Complete Replacement Guide + Best Compatible Options (2025)

🔵 LG Filter Guide

LG LT1000P Water Filter: Complete Replacement Guide + Best Compatible Options (2025)

👤 Rachel T. — Filter Specialist 📅 Updated January 2025 ⏱ 7 min read ✅ Verified compatible
RT
Rachel T.
Head of Filter Compatibility — SwapMyFilter
Rachel has personally tested every major LG filter variant including the LT1000P, LT700P, and ADQ series. Her compatibility research covers 200+ LG refrigerator models and powers the SwapMyFilter LG matching database.
47+LG Models
200 galFilter Life
NSF 42+53Certified
$19.95Compatible Price
LG LT1000P water filter cartridge ADQ74793501

If you own an LG French door, side-by-side, or bottom-freezer refrigerator made after 2018, the LG LT1000P is almost certainly your filter. It is the most popular LG replacement filter on the market — and also one of the most unnecessarily expensive at the OEM price of around $45, when NSF-certified compatible alternatives perform identically for under $20.

This guide covers everything: what the LT1000P is, which LG models it fits, exactly how to install it, the part number confusion that trips up thousands of buyers, and how to save over 50% without sacrificing a drop of water quality.

💡 Key Facts at a Glance

Also known as: ADQ74793501, LT1000PC, MDJ64844601 | Type: Twist-in internal | Location: Upper right of fridge interior | Life: 6 months / 200 gallons | Certifications: NSF/ANSI 42 and 53

What Is the LG LT1000P Water Filter?

The LT1000P is LG’s current-generation internal refrigerator water filter, introduced in 2018 as the successor to the LT700P. It uses a quarter-turn twist-in mechanism and mounts in the upper right interior of the refrigerator compartment. The activated carbon block media is certified under NSF/ANSI 42 and 53 to reduce over 30 contaminants including chlorine, lead, and cysts.

LG sells this filter under two names — LT1000P (consumer-facing) and ADQ74793501 (engineering part number). Both refer to the exact same filter. LT1000PC is a newer revision — also fully interchangeable.

⚠️ LT1000P vs LT700P vs LT800P — Do Not Mix These Up

These three LG filter generations are NOT interchangeable. The LT1000P (2018+) has different dimensions and thread pattern from the LT700P (2014–2018) and LT800P (2016–2020). Installing the wrong generation will result in a filter that will not seal, causing leaks or no water flow. Check your existing installed filter label to confirm your generation.

Which LG Refrigerators Use the LT1000P?

The LT1000P fits LG refrigerators from 2018 onwards. The fastest confirmation: look at the label on your currently installed filter. If it reads LT1000P or ADQ74793501, this guide is for you. Use our Filter Compatibility Checker for a guaranteed model-number match.

LG SeriesModel Prefix ExamplesTypeYears
LRMVS SeriesLRMVS3006S, LRMVS3006DFrench Door2018–present
LRFXS SeriesLRFXS2503S, LRFXC2426SFrench Door2018–present
LSXS SeriesLSXS26326S, LSXS26386SSide-by-Side2018–present
LRFDS SeriesLRFDS3016S, LRFDS3016DFrench Door2019–present

LG LT1000P Full Specifications

SpecificationDetails
Part NumbersLT1000P, ADQ74793501, LT1000PC, MDJ64844601
Filter TypeTwist-in internal, activated carbon block
LocationUpper right interior of refrigerator compartment
Rated Life6 months or 200 gallons
NSF CertificationsNSF/ANSI 42 (chlorine, taste) and NSF/ANSI 53 (lead, cysts, VOCs)
Lead ReductionGreater than 99%
Cyst ReductionGreater than 99.95%
OEM Retail Price~$44.99
Compatible Price$19.95 at SwapMyFilter

Best LT1000P Filter Options

💧
⭐ Best Value
SwapMyFilter LT1000P Compatible Filter
✅ NSF/ANSI 42 and 53 Certified
$19.95$44.99 LG OEM
Fits all LT1000P / ADQ74793501 / LT1000PC models. Same NSF certifications, same 6-month / 200-gallon life as LG OEM. Reduces lead >99%, cysts >99.95%, chlorine >97%. Guaranteed Fit Promise on every order.
🛒 Order Now — Ships Today
🔵
OEM Genuine
LG Genuine LT1000P (ADQ74793501)
✅ NSF/ANSI 42 and 53 Certified
$44.99
LG-branded filter with same NSF certifications. Best choice for LG refrigerators under 12 months old in their initial warranty period.
🛒 Shop LG OEM Filters

How to Install the LG LT1000P — Step by Step

nstalling LG LT1000P water filter in LG refrigerator upper right interior
1

Locate the Filter Housing

Open your LG refrigerator. Look in the upper right corner of the refrigerator interior. The LT1000P housing is a circular cavity with the installed filter visible as a protruding cylindrical cartridge.

2

Switch Off the Ice Maker

Lift the ice maker arm to the off position or press the ice maker off switch inside the freezer. This prevents water demand during the swap.

3

Remove the Old Filter

Grip the filter body firmly. Rotate counterclockwise approximately a quarter-turn until it releases from the housing. Pull straight out. Have a towel ready — a small drip of water is normal.

💡 If stuck, wrap the filter in a rubber band for grip and apply steady counterclockwise pressure. Never jerk or force.
4

Remove the Protective Cap

Unpack the new LT1000P. Remove the protective plastic cap from the O-ring end before inserting. This is the most common installation mistake — leaving the cap on prevents sealing and causes leaks.

5

Insert and Lock

Align the filter notch with the housing guide. Push in firmly and rotate clockwise approximately a quarter-turn until you feel a solid locked stop. The filter should sit flush with no wobble.

6

Flush 2–3 Gallons

Run the dispenser for 4–6 minutes, discarding the water. The first water will appear grey or cloudy — harmless carbon particles from the new filter. Continue until completely clear.

7

Reset the LG Filter Light

Press and hold the “Water Filter” button on your LG display panel for 3–5 seconds until the indicator changes from red or orange to blue or turns off. Turn the ice maker back on.

7-step guide to replacing LG LT1000P water filter

LG LT1000P Low Water Flow — Troubleshooting

Slow dispenser flow after installing a new LT1000P is the most common post-installation complaint. Work through these checks in order:

  1. Confirm the O-ring cap is fully removed — the cap blocks flow completely if left on
  2. Confirm the filter is fully locked — a partial quarter-turn leaves the internal valve partially closed; remove and reinstall with a firm locked stop
  3. Flush completely — run 3 full gallons before measuring flow. Carbon particles temporarily restrict flow during the initial flush
  4. Check home water pressure — LG requires minimum 20 PSI. Check at the supply valve behind the fridge with an inexpensive gauge
  5. Inspect the supply line — a kinked line behind the fridge is frequently overlooked
💡 Normal LT1000P Flow Rate

A properly installed, fully flushed LT1000P should dispense approximately 8–12 oz in 30 seconds at standard household pressure. If flow is significantly below this after a complete flush and confirmed installation, contact our support team with your LG model number.

What the LT1000P Removes — Contaminant Data

ContaminantNSF StandardReduction RateHealth Concern
Chlorine (taste and odour)NSF 42Greater than 97%Taste, odour, potential long-term exposure
LeadNSF 53Greater than 99%Neurotoxin — harmful at any level
Cysts (Cryptosporidium, Giardia)NSF 53Greater than 99.95%Parasitic waterborne illness
BenzeneNSF 53Greater than 99%Known carcinogen
AsbestosNSF 53Greater than 99%Carcinogen when ingested
MercuryNSF 53Greater than 96%Heavy metal toxin
Turbidity (sediment)NSF 53Greater than 99%Aesthetic and pathogen carrier

According to NSF International, NSF 53 certification for lead is particularly important for homes built before 1986 where lead pipes or lead solder may still be present in the plumbing system. The LT1000P’s greater than 99% lead reduction provides meaningful protection in these situations.

For the complete science on what filters do and don’t remove: What Does a Refrigerator Water Filter Actually Remove?

How Often Should You Replace the LT1000P?

Every 6 months or 200 gallons — whichever comes first. Signs it is overdue: chlorine taste returning, reduced dispenser flow, or the LG filter indicator turning red or orange.

For a personalised replacement schedule based on your household size and usage, use our filter life formula: Days until replacement = 200 ÷ (Number of people × gallons per person per day). A family of four using approximately 0.5 gallons per person daily reaches 200 gallons in around 100 days — about 3.3 months. Adjust upward for light users, downward for heavy households.

OEM vs Compatible LT1000P — The Money Decision

At $44.99 OEM vs $19.95 compatible, you save $25 per filter or $50 annually at the standard two-per-year schedule. Over 5 years, that is $250 in savings — for water that tests identically under NSF/ANSI 53 certification. The US Magnuson-Moss Warranty Act generally prevents LG from voiding your warranty simply for using a certified compatible filter. For full analysis: OEM vs Compatible Refrigerator Water Filters: The Honest Truth.

🔍

Confirm your LG model uses the LT1000P

Enter your refrigerator model number for a guaranteed verified match.

Check My Model →

Frequently Asked Questions About the LG LT1000P

+
Yes — LT1000P and ADQ74793501 are two part numbers for the identical filter. LT1000P is the consumer-facing model number on packaging and user manuals. ADQ74793501 is the engineering part number used in service documentation. LT1000PC is a minor housing revision — also identical and interchangeable. All three fit the same LG refrigerators.
+
Under the US Magnuson-Moss Warranty Act, LG generally cannot void your refrigerator warranty simply for using a certified compatible filter. They must demonstrate the compatible filter directly caused the damage claimed. For LG fridges in their first 12 months of full warranty, OEM is the cautious choice. For any LG refrigerator over 12 months old, a certified compatible is the recommended option.
+
The most common cause is the protective O-ring cap being left on the filter. Remove the filter and confirm the red or blue plastic cap on the O-ring end has been fully removed. Re-insert and rotate clockwise until fully locked. If leaking continues, the filter may not be fully seated — apply firm clockwise pressure to the locked stop position. Contact our support team if leaking persists after these steps.
+
The LT1000P (2018+) replaced the LT700P (2014–2018). They are not interchangeable — the physical dimensions and thread pattern differ. The LT1000P has an updated body and improved filtration specification. To confirm which filter your LG fridge uses, check the label on your installed filter, or enter your model number at our Filter Compatibility Checker.
+
No — the LT1000P, like most activated carbon refrigerator filters, does not significantly reduce fluoride. Carbon block filtration is not effective at removing fluoride ions. If fluoride removal is a priority for your household, a separate reverse osmosis system is needed. For everything the LT1000P does and does not remove: What Does a Refrigerator Water Filter Actually Remove?
+
The model number sticker is inside the refrigerator, typically on the upper left or right interior wall, or behind the crisper drawers on the back wall. LG model numbers look like: LRMVS3006S, LRFXS2503S, LSXS26326S. Enter your model number at our Filter Compatibility Checker for an instant guaranteed match.

Get Your LG LT1000P Compatible Filter Today

NSF-certified. Guaranteed to fit. $19.95 with same-day shipping. Save over $25 per filter vs LG OEM — for the same verified clean water.

🛒 Shop LG LT1000P Filters

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *